2" x 10" 60 Degree Roof Bracket

Overview

Roof Bracket

• For use of steeped roofs (eg. 6/12 to 10/12 pitches)
• Bracket support made from 1/4" steel (twice as thick as most other brackets)
• Double welded reinforced striking area for bracket removal
• Four welds per bracket make it structurally sound (no bending)
• Place bracket 4' or less apart and secure each bracket with three 16 penny (3" common round shank) nails to roof joists
• Inspect each bracket before and after each use
• Do not drop from building or roof, always handle with care
• Must be used with approved fall arrest system and any other safety equipment required by law
• Misuse of the bracket may result in injury or damage

Overview