500mL Concrete and Paving Stone Stripper

Overview

REMOVES:

• Paint & graffiti
• Rubber & tar
• Chewing gum
• A fast and effective way to remove paint, tar, rubber or chewing gum from concrete, masonry, metal, aluminum and wood surfaces DIRECTIONS:
• (Step 1) Apply sufficient Stonesaver Stripper to cover entire stain; allow product to stand for approximately 3 - 5 minutes; NOTE: Do not let product dry on surface; if product does dry, re- apply fresh product over same area to emulsify; scrub stained area with a stiff bristle brush; rinse area thoroughly with water (strong water pressure works best); repeat if necessary; NOTE: when removing stains from a previously coated surface, Stonesaver Stripper will also remove the underlying coating; reapply coating to stripped areas as required; when removing chewing gum, first remove excess with scraper; remove all stains with the appropriate Stonesaver stain cleaner
• (Step 2) Clean entire surface with Stonesaver Concrete Cleaner & Surface Prep
• (Step 3) Seal the surface with the appropriate Stonesaver sealer WARNING:
• Do not mix with other household chemicals; may cause blindness if swallowed; do not get in eyes or on skin or clothing; do not breathe fumes; keep out of reach of children; wear a mask, impervious gloves and safety glasses; use only in a well-ventilated area FIRST AID TREATMENT:
• Contains Methylene chloride, Methyl alcohol and Toluene; if swallowed, call a Poison Control Centre or doctor immediately; if person is alert, do not induce vomiting; if in eyes or on skin, rinse well with water; if on clothes, remove clothes; if breathed in, move person to fresh air

Overview