266mL Extreme Paintable Silicone Sealant

Overview

Silicone

• New XST uses advanced silicone
• Technology to deliver premium silicone performance, paintability and soap and water clean up
• XST has outstanding flexibility, strength, elongation and excellent paintability
• For interior or exterior use
• Just seal it, paint it, and forget it APPLICATIONS:
• Can be applied to: wood, concrete, fibreglass, stone, metal, brick, plastic, formica and most painted surfaces
• Use on: doors, windows, moldings, baseboards, siding and trim, soffits FEATURES:
• Paintable with Latex and oil based paints
• Paintable anytime after skin over... no limitations
• Soap and water clean up
• Indoor and outdoor use
• Won't shrink
• Low odour
• Excellent adhesion
• Permanently flexible
• Easy application from 40 to 110 degrees F DIRECTIONS:
• Remove dirt, grease, excess moisture and old caulk
• If joint exceeds 1/2 x 1/2", use backer rod
• Cut tip to desired bead size, puncture inner seal and place into caulk gun
• Hold a 45 degree angle and squeeze trigger to start flow of material
• Tool sealant if desired
• Allow sealant to skin over
• Paint after skin over LIMITATIONS:
• Not recommended for aquariums, food areas where FDA compliance is required, surface that will exceed 400 degrees F
• Do not apply at temperatures below 40 degrees F
• Minimum Application Temp: 40 degrees F
• Service Temp Range: 40 to 110 degrees F
• Coverage: 51 linear feet of 3/16 bead
• Storage: in dry area less than 60 degrees F
• Clean-up: soap and water
• Shelf Life: two years from date of manufacture

Overview